Faqs - Seiki SVISION SC-600AU9FL Instruction Manual

FAQs

Problem
Washing
machine is not
starting
Door can't be
opened
Water Leakage
Detergent
residues are in
the dispenser
Indicator or
display isnt
working
Abnormal Noise
ERROR CODES
Problem Possible Cause
Door Lock
E30
Problem
Water
injecting
E10
problem while
washing
Drain problem
E21
while washing
PLEASE CALL CUSTOMER SERVICE ON 1300 296 699 IF THERE ARE ANY OTHER ISSUES.
Possible Cause
Door is not closed
properly
Washer's
safety protection
is active
The connection
between inlet
pipe or outlet
hose is not tight
detergent might
be dampened
Disconnect the
power, PC
board or harness
may have a
connection
problem.
Reason
Door is not closed properly.
1. Tap is not opened or water flows
too slowly.
2. Inlet valve filter is blocked.
3.inlet pipe is twisted
4. if water is not supplied.
1. Outlet hose is blocked or
twisted
2. drain pump is blocked.
Solution
Restart after the door is closed, check if the
clothes are stuck
Disconnect the power and restart
the appliance
check and fasten water pipes.
Clean up outlet hose.
Clean and wipe the detergent dispenser
Check if the power is on and the power plug is
connected correctly.
Check if the Transport bolts at the back of the
appliance have been removed.
Check it's installed on a level and solid floor.
Solution
restart after door is closed.
1. Open the Tap or wait till water
supply is back to normal.
2. Check inlet valve filter
3. Straighten water pipe,
4. check other taps in the room.
1. Wash and straighten the hose.
2. Wash drain pump filter.
23