GE Zoneline AZ65 Owner's Manual page 10

Auxiliary controls on your Zoneline
MODE 5 Temperature Limiting
costs by limiting the lowest temperature that can be
obtained in cooling and the highest temperature that can
be obtained in heating.
Press MODE until a 5 appears in the first digit of the
display for Temperature Limiting
COOL
change to heat mode, press MODE again and the HEAT
the limits available. Press AUX SET to lock in your
AUX SET mode, or press MODE to
continue setting other functions.
MODE 6 Use Wall Thermostat
Setting this mode to ON will allow the unit to operate
Press MODE until a 6 appears in the first digit of the
display for Class 2 mode.
Press the + pad to turn the option ON "
again to turn the option ON "
to the previous setting. Press AUX SET to lock in your
AUX SET mode, or press MODE to
continue setting other functions.
MODE 7 Duct Mode
proper circulation.
Press MODE until a 7 appears in the first digit of the
display. Press the + or - pad to set this switch to
OFF " " or ON "
of the display. Press AUX SET to lock in your selection
AUX SET mode.
MODE to continue setting other
functions. Pressing MODE
you to AUX SET
display.
+ pad
" for "auto change
Temperature Limiting Cool – Limit 2
Temperature Limiting Heat – Limit 5
Class 2 OFF
Class 2 ON
(Cool/Heat)
Duct Mode OFF
Duct Mode ON
Class ON
(Auto Change Over)
49-7773