Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Selecting the Sound Mode
The "M/S" button displays/controls the processing and output of the audio signal.
When power is switched ON, the mode is automatically preset to either "Dual" or "Stereo"
depending on the current transmission.
If the receiving conditions deteriorate, listening will be easier if the mode is set to the "Mono"
position using the M/S button.
If the stereo signal is weak (or if intermittent Stereo-Mono) and automatic switching occurs,
then switch to the "Mono" mode.
When receiving mono sound in the AV mode, connect to the "L" input jack on the panels. If
the mono sound comes out only from the left speaker, then press the M/S button.
Adjusting the Volume/Switching the Sound Off Temporarily
You can adjust the volume by pressing the VOL+ or
VOL- button on the remote control.
You can switch the sound off temporarily by pressing
the MUTE button on the remote control, for example
you may wish to answer the telephone.
1. Press the VOL + button to increase the volume.
(cursor moves to the right)
2. Press the VOL - button to decrease the volume.
(cursor moves to the left)
3. Press the MUTE button.
Result: The sound is switched off and "
displayed.
4. When you wish to turn the sound back on at the
same volume as before, press the MUTE button
again (or either of the volume buttons).
SLEEP
ENT
MULTI
MENU
VOLUME
DISPLAY
Q-VIEW PROGRAM
STILL
A/D
AUTO
?
i
PROG DN PROG UP
(depending on TV mode)
" is
M/S
MUTE
SIZE
Advertisement
Table of Contents
