Setting Up The Monitor; Installation - Philips 220S2 plus User Manual

2. Setting up the monitor

2.1 Installation

Package contents
220S2/220S2 plus
Monitor
Power cord VGA signal cable (optional)
Install base stand
220S2
1. Place the monitor face down a smooth
surface taking care to avoid scratching or
damaging the screen.
2. Hold the monitor base stand with both
hands and firmly insert the base stand into
the base column.
LCD Monitor
Monitor LCD / Monitor LCD / LCD-Monitor / Monitor
LCD / LCD监视器 / РК-монитор / LCD-монитором
220S2
Base stand
Quick start guide
Guide de démarrage rapide / Guía rápida / Kurzanleitung / Guida rapida /
快速入门指南 / Швидке керівництво для початку експлуатації /
Краткое руководство по запуску
Installation / Installation / Instalación / Installation / Installazione / 安装 / Інсталяція
/ Установка
Connect / Connectivité / Conectividad / Verbindungsfähigkeit / Connettività /
连接性 / Підключитися / Подключиться
Adjust ergonomic / Réglages ergonomiques / Ajustes ergonómicos / Ergonomische /
Einstellmöglichkeiten / Regolazioni ergonomiche / 人体工程学调整 /
Регулювати ергономічне / Настройка эргономики
Register your product and get support at
www.philips.com/welcome
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips Electronics N.V. and are used under license from
Koninklijke Philips Electronics N.V.
Quick start guide
EDFU CD
DVI cable (optional)
CLICK!
CLICK!
220S2 plus
1. Place the monitor face down a smooth
surface taking care to avoid scratching or
damaging the screen.
2. Hold the monitor base stand with both
hands and firmly insert the base stand into
the base column.
3. Attach the monitor base stand to the base
column then fasten base stand.
Caution
Do not release the height adjustment pin lock
from the base column before the base stand is
firmly fixed.
4
DON'T
DON'T
DON'T
DON'T