Philips 220S2 User Manual

Philips 220S2 User Manual

Philips lcd monitor user manual
Hide thumbs Also See for 220S2:

Advertisement

www.philips.com/welcome
EN User manual
Customer care and warranty
Troubleshooting & FAQs
220S2
220S2
1
32
44
plus

Advertisement

Table of Contents
loading

Summary of Contents for Philips 220S2

  • Page 1 EN User manual Customer care and warranty Troubleshooting & FAQs 220S2 220S2 plus...
  • Page 2: Table Of Contents

    SmartImage ... 9 SmartContrast ... 10 SmartSaturate ... 11 SmartSharpness ... 11 Philips SmartControl Premium ... 12 Philips Pixel Defect Policy ... 20 Technical Specifications ... 22 Resolution & Preset Modes... 25 Automatic PowerSaving ... 25 Regulatory Information ... 26 Customer care and warranty ...
  • Page 3: Important

    1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. The Philips guarantee applies provided the...
  • Page 4: Notational Descriptions

    • IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging”...
  • Page 5: Disposal Of Product And Packing Material

    1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment- WEEE This marking on the product or on its packaging illustrates that, under European Directive 2002/96/ EC governing used electrical and electronic appliances, this product may not be disposed of with normal household waste.
  • Page 6: Setting Up The Monitor

    1. Place the monitor face down a smooth 220S2 Base stand 2. Hold the monitor base stand with both Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. EDFU CD DVI cable (optional) 3.
  • Page 7: Operating The Monitor

    Front view product description Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
  • Page 8: The Osd Menu

    Tilt Swivel Height adjustment On, Off Remove the height adjustment pin lock before adjusting the height. Insert the height adjustment pin lock before lifting the monitor. Physical Function (220S2/220S2 plus ) (220S2 plus ) 70mm 70mm (220S2 plus ) Note...
  • Page 9: Remove Base Stand And Base

    220S2 Place the monitor face on a safe surface, release the stand lock and pull the base stand away from the base column. 220S2 plus 70mm Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury.
  • Page 10: Remove Base

    Remove the Base Condition: • For VESA standard mounting applications 220S2 220S2/220S2 plus 1. Remove the 8 screw covers. 2. Remove the 4 screws and then remove the base from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.
  • Page 11: Product Information

    How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast,...
  • Page 12: Smartcontrast

    There are six modes to be selected: Office, Photo, Movie, Game, Economy and Off. • Office: Enhances text and dampens brightness to increase readability and reduce eye strain. This mode significantly enhances readability and productivity when you're working with spreadsheets, PDF files, scanned articles or other general office applications.
  • Page 13: Smartsaturate

    3.3 SmartSaturate What is it? Smart technology that controls color saturation, the degree to which one on screen color is blended in neighboring colors, to deliver rich and vibrant images for more entertainment fun when you are viewing videos. Why do I need it? You want rich, vibrant images for more entertainment fun when viewing photos or videos.
  • Page 14: Philips Smartcontrol Premium

    3.5 Philips SmartControl Premium The new SmartControl Premium software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through...
  • Page 15 Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
  • Page 16 Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input. • Example for Color Calibration "Show Me" starts color calibration tutorial. Start - starts the 6-step color calibration sequence. Quick View loads the before/after images.
  • Page 17 First color Calibration Screen: • Previous button is disabled until the second color screen. • Next goes to the succeeding target (6-targets). • Final next goes File>Presets pane. • Cancel closes the UI and returns to the plug in page. SmartImage Allows user to change setting for better display setting based on content.
  • Page 18 To enable Theft Deterrence, clicking Enable Theft Deterrence Mode button brings up the following screen: • User can enter PIN between 4 and 9 digits numbers only. • After entering PIN, Accept button takes user to the pop-up dialog box on the following page.
  • Page 19 Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Premium tabs are not available. • Display the Source instruction pane and current input source setting. • On single input displays, this pane will not be visible.
  • Page 20 Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
  • Page 21 Task Tray Menu Enabled The task tray menu can be displayed by right- clicking on the SmartControl Premium icon from the task tray. Left Click will launch the application. The task tray has five entries: • Help - Access to User Manual file: Open User Manual file using the default browser window.
  • Page 22: Philips Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty.
  • Page 23 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
  • Page 24: Technical Specifications

    4 Technical Specifications 220S2/220S2 plus Picture/Display LCD panel type Backlight Panel size Aspect ratio Pixel Pitch Brightness SmartContrast Contrast ratio (typ.) Response time (typical) Optimum Resolution Viewing angle Picture Enhancement Display colors Vertical refresh rate Horizontal Frequency sRGB Connectivity Signal input...
  • Page 25 Power On mode On mode (ECO mode) (typical) <18 W (typical) Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typcial) Sleep Heat Dissipation* Normal Operation Sleep Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Box dimension (WxHxD) Weight Product with stand...
  • Page 26 Color Finish Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. Silver. (www.epeat.net) 100% recyclable CE Mark, Energy Star 5.0, FCC Class B, SEMKO, TCO5.0, TÜV/ GS, TÜV Ergo, UL/cUL...
  • Page 27: Resolution & Preset Modes

    4.1 Resolution & Preset Modes Maximum Resolution 220S2/220S2 plus 1680 x 1050 at 60 Hz (analog input) 1680 x 1050 at 60 Hz (digital input) Recommended Resolution 220S2/220S2 plus 1680 x 1050 at 60 Hz (digital input) H. freq (kHz) Resolution 31.469...
  • Page 28: Regulatory Information

    Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. TCO Displays 5.0 Information Congratulations,...
  • Page 29 Benefits of EPEAT Reduce use of primary materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life. CE Declaration of Conformity This product is in conformity with the following standards...
  • Page 30 Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 31 Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
  • Page 32 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a...
  • Page 33 Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs.
  • Page 34: Customer Care And Warranty

    Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received. What is covered?
  • Page 35 The Philips F1rst Choice Warranty may not apply • The documents have been altered in any way or made illegible; • The model or production number on the product has been altered, deleted, removed or made illegible;...
  • Page 36 F1rst Choice Contact Information Country Code Austria Belgium Denmark Finland +358 Luxembourg +352 The Netherlands Norway Poland Portugal +351 Spain Sweden Switzerland United Kingdom Telephone number Tariff €0.07 0810 000206 €0.06 078 250851 3525 8761 Local call tariff €0.08 840 320 041 26 84 30 00 Local call tariff €0.10...
  • Page 37 Information Centers In case your Philips product is not working correctly or is defective, please contact your Philips dealer or directly the Philips Service and Consumer Information Centers...
  • Page 38 Consumer Information Centers Argentina / Australia / Brasil / Canada / New Zealand / Belarus / Bulgaria / Croatia / Czech Republic / Estonia / United Arab Emirates / Hong Kong / Hungary / India / Indonesia / Israel / Latvia / Lithuania / Malaysia / Middle East + North Africa / New Zealand / Pakistan / Romania / Russia / Serbia &...
  • Page 39 123290 Moscow Russia Tel. +7(495)797 3434 Profservice: 14A -3, 2Karacharovskaya str, 109202, Moscow , Russia Tel. +7(095)170-5401 TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com LLC Topaz Company...
  • Page 40 Fax: 021-7510982 E-mail: gepta@cbn.net.id Service hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat. Phone: 021-3455150, 34835453 3.
  • Page 41 Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec.
  • Page 42 Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase.
  • Page 43 Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 44 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties.
  • Page 45 In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
  • Page 46: Troubleshooting & Faqs

    7 Troubleshooting & FAQs 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems No Picture (Power LED not lit) • Make sure the power cord is plugged into...
  • Page 47 • Check if USB upstream cable is connected to your monitor correctly • Turn your monitor OFF and ON once again. You may need to install/reinstall USB drivers in your PC and ensure hub is active. • Reconnect your USB peripherals For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
  • Page 48: Smartcontrol Premium Faqs

    Remove SmartControl Premium and re-install it once more. Q5. I forgot my PIN for Theft Deterrence Function. How can I do? Ans.: Philips Service center has a right to ask for legitimate identification and authorization, in order to establish ownership of the monitor.
  • Page 49 Q6. In a monitor with the Smartlmage feature, the sRGB scheme of color temperature function in SmartControl Premium is not responding, why? Ans.: When Smartlmage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable Smartlmage with button at the front bezel of your monitor.
  • Page 50: General Faqs

    Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1680x1050@60Hz (22"). • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC.
  • Page 51 (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K. Q9: Can the Philips LCD Monitor be mounted on the wall? Ans.: Yes. Philips LCD monitors have this optional feature.
  • Page 52 Q13: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging"...
  • Page 53 2010 © Koninklijke Philips Electronics N.V. All Rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.

Table of Contents