INSTRUMENT AND CONTROL FUNCTIONS
Seat
To remove the seat
1. Remove panels A and B. (See
1
page 6-5.)
2. Remove the bolts and pull the seat
2
off.
3
4
5
6
1. Bolt
7
To install the seat
1. Insert the projection on the front of
8
the seat into the seat holder as
shown.
9
EAU13981
2
1
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1
3-8
Helmet holder
1
1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, turn the key
to the original position, and then re-
move it.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU14290
2
EWA10160