Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-9. F/R change lever, Wave washer, Cushion and Rubber pin 5 in Housing set
ASSEMBLING
Refer to Fig. 47.
Fig. 47
Fit the protrusion of Switch into Oval hole of F/R
change lever and assemble them to Housing L.
protrusion of
Switch
Housing set (L)
Battery housing set (L)
Assemble Cushion to Battery
housing set (L) at the rear side of
Terminal.as illustrated above.
oval hole of
F/R change
lever
Terminal
Pass Pin 1.5 through Rubber pin 5.
And then, assemble them to Battery
housing set (L) as illustrated right.
See more at http://safe-manuals.com
P 12/ 14
Wave washer 15
Do not forget to put Wave
washer 15 in place for
holding Ball bearing
607DDW on the commutator
end of Armature.
Pin 1.5
Rubber pin 5
Advertisement
