Ducati 998S Owner's Manual page 90

Closing
0
0
2
Monoposto (fig. 14.3)
Arrange all parts properly inside the compartment under
1 1
the seat.
Lower the tail guard to its horizontal position. Press on
the rear end (2) of the seat until you hear the catch click.
Pull the tail guard gently up to make sure it is firmly
secured to the frame.
Biposto (fig. 14.4)
E
Pull gently the tail guard outwards and lower it to its
1
horizontal position. Press on the passenger pillion to
allow the clips (3) – integral with the fairing - to catch the
pins (4) – integral with the frame, until you hear the catch
fig. 14.3
click.
Pull the tail guard gently up to make sure it is firmly
secured to the frame.
3
4
fig. 14.4
22