Step 4: Turn On The Notebook; Step 5: Set Up Windows - HP Pavilion ZE4200 Startup Manual

Step 4: Turn on the notebook

Press the power button above the left side of the keyboard. The notebook then boots
up, and Windows starts automatically.
Hint
If your notebook does not turn on when operating on battery power, the battery may
be out of power. Plug in the AC adapter and press the power button again. Leave
the AC adapter plugged in for at least an hour—or up to 3 hours to charge the
battery fully.

Step 5: Set up Windows

Your notebook has the Microsoft Windows operating system preinstalled on its hard
disk drive. The first time you turn on your notebook, the Windows Setup program
runs automatically so you can customize your setup.
1. Follow the Setup program instructions on the screen. If the program prompts you
2. Check the modem's country or region settings: select Start > Control Panel >
to enter the Product ID code, you will find this code on the bottom of the
notebook.
Printers and Other Hardware > Phone and Modem Options, then choose your
country or region.
Getting Started with Your Notebook
Setting Up Your Notebook
Startup Guide 13