5.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module (1) as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
b.
Disconnect the webcam/microphone module (2) from the webcam/microphone module.
c.
Remove the webcam/microphone module (3). The webcam/microphone module is available
using spare part number 639387-001.
6.
If it is necessary to replace the hinge covers:
a.
Remove the two Phillips PM2.0×3.0 (1) screws that secure the hinge covers to the
display enclosure.
Component replacement procedures
97