Bluetooth module
NOTE:
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is available using spare part number 489822-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the switch cover and keyboard (see
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the top cover.
3.
Remove the Bluetooth module from the top cover (3).
4.
Remove the Bluetooth module.
Reverse this procedure to install the Bluetooth module.
Battery on page
48).
Switch cover and keyboard on page
Spare part number
483113-001
Component replacement procedures
63).
79