1. Manuals
  2. Brands
  3. Stanley Manuals
  4. Drill
  5. STCD1081B2-IN
  6. Quick start manual

Stanley STCD1081B2-IN Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
STCD1081B2
English
Page 4

Advertisement

Table of Contents
loading

Related Manuals for Stanley STCD1081B2-IN

Summary of Contents for Stanley STCD1081B2-IN

  • Page 1 STCD1081B2 English Page 4...
  • Page 2 ENGLISH (Original instructions) FIG. FIG.
  • Page 3 ENGLISH (Original instructions) FIG. FIG. FIG.

  • Page 4: Intended Use

    (Original instructions) Intended use parts. Damaged or entangled cords increase the risk of electric shock. Your Stanley drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal and e. When operating a power tool outdoors, use an plastics.
  • Page 5 ENGLISH (Original instructions) g. If devices are provided for the connection of dust b. Use Power tools only with specifically designated extraction and collection facilities, ensure these are battery packs. Use of any other battery packs may connected and properly used. Use of dust collection create a risk of injury and fire.

  • Page 6: Residual Risks

    ENGLISH (Original instructions) • Before drilling into walls, floors or ceilings, check for tool with another. The declared vibration emission value may thelocation of wiring and pipes. also be used in a preliminary assessment of exposure. • Avoid touching the tip of a drill bit just after drilling, as it Warning! The vibration emission value during actual use of may be hot.

  • Page 7: Electrical Safety

    Chargers Fitting and removing the battry (FIG. C) • Use your STANLEY charger only to charge the battery in • To fit the battery (5), line it up with the receptacle on the the tool with which it was supplied. Other batteries could tool.

  • Page 8: Speed Selector

    ENGLISH (Original instructions) The charging indicator (11) will flash green continuously • To select reverse rotation, push the forward/reverse (slowly). slider to the right. • To lock the tool, set the forward/reverse slider into the The charge is complete when the charging indicator (11) centre position.

  • Page 9: Maintenance

    • If screws are difficult to tighten, try applying a small Should you find one day that your Stanley product needs amount of washing liquid or soap as a lubricant. replacement, or if it is of no further use to you, do not dispose of it with household waste.

  • Page 10: Technical Data

    These products also comply with Directive Weight “2004/108/EC (until 19.04.2016), 2014/30/EU (from Charger 20.04.2016)” and 2011/65/EU. For more information, please contact STANLEY at the following address or refer to the Input Voltage 100 - 240 back of the manual. Output Voltage 10.8...

  • Page 11: Service Information

    STANLEY location nearest you. One years full warranty If your STANLEY product becomes defective due to faulty materials or workmanship within 12 months from the date of purchase, STANLEY guarantees to replace all defective parts free of charge or –...
  • Page 12 90623014 01/2015...
  • Page 13 Ebrahim Al Zayani, Opposite to Al Fouzan, Jeddah highway or King Abdul Aziz road, Yanbu. Tel: (966-4) 3960980, Fax: (966-4) 3961980. Mohamed Ahmed Bin Afif Est., P.O. Box 530, Yanbu, Al Bahr, Tel: (966-4) 3222626/ 3228867, Fax: (966-4) 3222210. SOUTH AFRICA: Stanley Black & Decker - RSA, 199 Winze Drive Stormill Ext 9 Roodepoort, Tel: (2711) 472 0454, Fax: (2711) 472 0482.

This manual is also suitable for:

Stcd1081b2

Table of Contents