Table of Contents
Advertisement
Chapter 12
•
To use the smart connect function
The smart connect function lets you to enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to
Advanced
>
2. Enable
Smart
Connect.
3. Keep the default or set a new SSID and password, and click Save. This SSID and
password will be applied both for 2.4GHz and 5GHz wireless networks.
•
To change the security option:
1. Go to
Advanced
>
2. Select the wireless network
3. Select an option from the
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.
In addition
•
Mode
- Select a transmission mode according to your wireless client devices. It is
recommended to just leave it as default.
•
Channel Width
- Select a channel width (bandwidth) for the wireless network.
•
Channel
- Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
Wireless
>
Wireless
Settings.
Wireless
>
Wireless
Settings.
2.4GHz
or 5GHz.
Security
drop-down list. We recommend you don't change
Customize Your Network Settings
76
Advertisement
Table of Contents
