HP Pavilion DV2-1001 Maintenance And Service Manual page 77

4. Remove the display assembly (3).
5. If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers
are included in the Rubber Kit, spare part number 517761-001.
(2) Two Phillips PM2.0×5.0 screws.
6. Flex the inside edges of the bottom edge (1), the left and right sides (2), and the top edge (3) of
the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures 69