Component ID
Power Controls
Component
1
Display switch*
2
Power button*
*This table describes default settings. For information about changing the
function of the display switch or power button, refer to the
Power Preferences"
1–4
Description
Initiates standby when the notebook is closed.*
When the notebook is
■ Off, press to start the notebook in Windows.
■ On, briefly press to initiate hibernation.
■ In standby, briefly press to resume from standby
into Windows.
■ In hibernation, briefly press to restore from
hibernation into Windows.
✎
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for at least 4 seconds
to turn off the notebook.
section in
Chapter 3, "Power."
"Setting Other
Hardware and Software Guide