Top Cover - HP Pavilion DM3-1030 Maintenance And Service Manual

Top cover

✎
The top cover spare part kit includes a palm rest, TouchPad and cable, and TouchPad button board and cable.
Description
Top cover (AMD systems)
Top cover (Intel systems)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/wireless module compartment cover (see
c. Keyboard (see
Remove the top cover:
1. Turn the unit upside down with the front facing you.
2. Remove the following screws:
❏
Two Phillips PM2.5x10.0 screws 1 on the top right and left hand corners
❏
Three Phillips PM2.0x4.0 screws 2 in the battery bay
❏
Five Phillips PM2.5x6.0 screws on the front edge
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page 4-9)
"Keyboard" on page 4-16)
4-6).
"WLAN module" on page
Removal and replacement procedures
Spare part number
583925-001
580692-001
4-12)
4–19