Bluetooth - Pioneer AVH-A200BT Operation Manual

Appears when all characters are not displayed on the display area.
If you touch the key, the rests are scrolled for display.
NOTE
This function is available only when you stop your vehicle in a safe place and apply
the handbrake.
Appears when items cannot be displayed on a single page.
Touch or to view any hidden items.
Operating the time bar
You can change the playback point by dragging the key.
NOTE
The time bar function may vary depending on the activating source.
Top menu screen
21
6/10
Radio CD/DVD
Source icons
Setting the time and date (page 22)
Settings (page 16) and Favourite menu (page 21)
Hands-free phoning (page 7) (AVH-A205BT)
AV source off
6
En
48
USB BluetoothAudio AUX Camera
If you select , you can turn off almost all functions.
The unit turns on by operating following functions:
• An incoming call is received (only for hands-free phoning via Bluetooth). (AVH-
A200BT)
• A rear view camera image is input when the vehicle is in reverse.
• A button on this unit is pressed.
• The ignition switch is turned off (ACC OFF), then turned on (ACC ON).

Bluetooth

A200BT
Bluetooth connection
1
Turn on the Bluetooth function on the device.
2
Press .
3
Touch then .
The Bluetooth menu screen appears.
4
Touch [Connection].
5
Touch .
The unit starts to search for available devices, then displays them in the device list.
6
Touch the Bluetooth device name.
After the device is successfully registered, a Bluetooth connection is established by the
system. Once the connection is established, the device name is displayed on the list.
NOTES
• If three devices are already paired, [Memory Full] is displayed. Delete a paired device first (page 7).
• If your device supports SSP (Secure Simple Pairing), a six-digit number appears on the display of this
product. Touch [Yes] to pair the device.
• is invalid when the device is already connected, during connection or disconnected.
TIP
The Bluetooth connection can also be made by detecting this product from the Bluetooth device.
Before registration, make sure that [Visibility] in the [Bluetooth] menu is set to [On] (page 7). For details
on Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.