Pioneer AVH-A200BT Operation Manual page 18

[Beep Tone]
Menu Item Description
[Beep Tone] Select [Off] to disable the beep sound when the button is
[On] [Off] pressed or the screen is touched.
[Touch panel calibration]
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
• Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
• Do not turn off the engine while saving the adjusted position data.
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
Menu Item Description
1
[Touch panel calibration] Touch [Yes].
2
Touch four corners of the screen along the arrows.
3
Press
The adjustment results are saved.
4
Press
Proceed to 16-point adjustment.
5
Gently touch the centre of the [+] mark displayed on
the screen.
The target indicates the order.
6
Press and hold
The adjustment results are saved.
[Dimmer Settings]
Menu Item Description
[Dimmer Trigger] Setting the dimmer brightness.
[Auto] Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
[Manual] Switches the dimmer to on or off manually.
[Time] Switches the dimmer to on or off at the time you adjusted.
18
En
.
once again.
• When you press , the previous adjustment
position returns.
• When you press and hold , the adjustment is
cancelled.
.
Menu Item Description
[Day/Night] Setting the dimmer duration by day or night.
You can use this function when [Manual] is set to [Dimmer
Trigger].
[Day] Turns the dimmer function to off.
[Night] Turns the dimmer function to on.
[Dimmer Duration] Adjust the time that the dimmer is turned on or off by
dragging the cursors or touching
You can use this function when [Dimmer Trigger] is set to
[Time].
TIPS
• Each touch of
forwards in the 15 minute width.
• When the cursors are placed on the same point, the dimmer
available time is 0 hours.
• When the cursor for off time setting is placed on the left end and
the cursor for on time setting is placed on the right end, the
dimmer available time is 0 hours.
• When the cursor for on time setting is placed on the left end and
the cursor for off time setting is placed on the right end, the
dimmer available time is 24 hours.
NOTES
• The time display of the dimmer duration adjusting bar depends
on the clock display setting (page 22).
• This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
[Picture Adjustment]
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable
these functions, you must stop in a safe place and apply the handbrake.
To adjust following menu, touch ,
Menu Item Description
[Brightness] Adjust the black intensity.
[-24] to [+24]
[Contrast] Adjust the contrast.
[-24] to [+24]
or .
or moves the cursor backwards or
, , to adjust.