Using OmniBook Plug-In Modules
Using the Zip Drive
To eject a Zip disk manually
The OmniBook must be powered on for normal disk ejection from the Zip drive. If
you need to remove a Zip disk from the drive when power is off, carefully push a
straightened paper clip into the emergency eject hole located on the eject button.
C A U T I O N
Use the manual disk eject procedure only when OmniBook power is off. Do
not try to forcibly remove a Zip disk from the drive. If the disk does not eject
immediately, repeat the manual disk eject procedure.
1-15