Using the CD-ROM Drive
You can install the CD-ROM drive module in the plug-in module bay. This section
describes how to
Insert or remove a CD.
Open the CD-ROM drive manually.
To insert or remove a CD
1. Press the button on the face of the CD-ROM drive. If you are using this drive for
the first time, be sure to remove the cardboard packing insert if it is present.
2. Place the CD into the drive (label facing up) and gently press down to seat the
CD on the spindle–or–remove the CD.
3. Close the door to the drive.
Using OmniBook Plug-In Modules
Open button
1-11