Table of Contents
Advertisement
Camera menu items (continued)
Hour Meter screen
Hou r M et er
Op erati on
Fa n1
Fa n2
Wi per1
Wi per2
Re turn
Operation
Displays the cumulative time that power has been supplied to the unit.
(8-digit numerical value)
Fan1
Displays the cumulative time that the cooling fan on the camera head
side has operated. (8-digit numerical value
Fan2
Displays the cumulative time that the cooling fan on the pan/tilt head
side has operated. (8-digit numerical value
Wiper1
Display the number of times that the wiper has been driven since the
unit was shipped from the factory. (8-digit numerical value
Wiper2
Display the number of times that the wiper has been driven since the
wiper rubber was replaced. (8-digit numerical value
Return
Return to the previous menu level.
*
1
If a cooling fan or wiper error is detected, [:E] is displayed after the
cumulative time or number of times to indicate the status.
When an abnormality with the temperature sensor is detected,
[TEMP. Sensor: E] is displayed.
xx x xx xx x
xx x xx xx x
xx x xx xx x
xx x xx xx x
xx x xx xx x
1
)
*
)
*
1
)
1
*
)
1
*
53
Advertisement
Table of Contents
