When The Work Is Done; Changing The Dust Bag And Filters - Bosch BSG7 Series Instruction Manual

en
Vacuuming
8
Figure
The required suction power can be selected infinitely
variably by adjusting the slide control.
Lowest
suction range:
For vacuuming delicate fabrics, e.g. curtains.
Low
suction range:
For daily vacuuming of lightly soiled floors.
Medium
suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
High
suction range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.
9
Figure
Adjusting the floor tool:
a) For vacuuming rugs
and carpets
b For vacuuming
hard floors
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on its use and maintenance.
10*
Figure
Vacuuming with accessories
(attach to handle or suction pipe as required).
a) Crevice nozzle
For cleaning crevices and corners.
b) Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
c) Hard furnishings brush
For vacuuming picture frames, books, furniture requiring
particular care, etc.
11
Figure
Other accessories that you do not need can be stored
easily in the accessories compartment of the vacuum
cleaner lid.
Hard-floor brush
12*
Figure
For vacuuming hard floor coverings (tiles, parquet floor-
ing, etc.)
10
Figure
Figure

When the work is done

Figure
Figure
=>
=>

Changing the dust bag and filters

Replacing the dust bag
Figure
Figure
Figure
a) Seal the dust bag by pulling the sealing strip and then
b) Insert a new dust bag into the holder and close the dust
!
* Dependent on model
13
Once you have switched off the vacuum cleaner, you can
use the parking aid on the back of the vacuum cleaner if
you wish to stop vacuuming for a short time.
To do this, slide the catch on the floor tool into the
groove on the back of the vacuum cleaner.
14
The vacuum cleaner can also be carried using the swing
handle to overcome obstacles, e.g. steps.
15
Unplug the vacuum cleaner.
Briefly pull the power cord and release. The cord rewinds
automatically.
16
To store or transport the vacuum cleaner, use the storage
aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the catch
on the floor tool into the groove on the underside of the
vacuum cleaner.
17
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the highest
suction power is selected, the dust bag must be
changed, even though it may not yet be full. In this case
it is essential to change the dust bag due to the type of
material it contains.
First check that the nozzle, suction pipe and flexible hose
are not blocked, as this would also lead to the dust bag
change indicator being triggered.
18
Open the lid by moving the locking lever in the direction
of the arrow.
19
remove it.
bag compartment lid.
Caution: the lid will only close when the dust bag is
inserted.