HP Mini 110-3030 Getting Started page 39

b. Grasp the edge of the memory module (2), and then gently pull the memory module out of
the memory module slot.
CAUTION:
edges only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
10. Insert a new memory module:
CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right
edges of the memory module, until the retention clips snap into place.
CAUTION:
memory module.
To prevent damage to the memory module, hold the memory module by the
To prevent damage to the memory module, be sure that you do not bend the
Adding or replacing memory modules 33