HP Mini 1000 Maintenance And Service Manual page 70

c. Remove the two Phillips PM2.0×3.0 screws (1) that secure the webcam module to the display
enclosure, and then remove the webcam module (2). The webcam module is available using
spare part number 504594-001 for all 8.9-inch panels.
6. If it is necessary to replace the display panel, perform the following steps:
a. Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the display
enclosure.
b. Remove the wireless antenna cables (1) from the clips and routing channels built into the
display and brackets (2).
62 Chapter 4 Removal and replacement procedures