Front Components - HP Mini 1000 Maintenance And Service Manual

Front components

Item Component
(1) Power light
(2) Power switch
(3) Drive light
(4) Battery light
(5) Wireless light
(6) Wireless switch
8 Chapter 2 External component identification
Function
● On: The device is on.
●
Blinking: The device is in Standby.
● Off: The device is off.
●
When the device is off, slide the switch to turn on the
device.
●
When the device is on, briefly slide the switch to
initiate Hibernation.
● When the device is in Standby, briefly slide the switch
to exit Standby.
●
When the device is in Hibernation, briefly slide the
switch to exit Hibernation.
If the device has stopped responding and shutdown
procedures are ineffective, slide and hold the power switch
for at least 5 seconds to turn off the device.
To learn more about your power settings, select Settings
> System tab > Power Management.
Blinking: The hard drive or flash drive is being accessed.
● On: A battery is charging.
●
Blinking: A battery that is the only available power
source has reached a low battery level. When the
battery reaches a critical battery level, the battery
light begins blinking rapidly.
●
Off: If the device is plugged into an external power
source, the light turns off when all batteries in the
device are fully charged. If the device is not plugged
into an external power source, the light stays off until
the battery reaches a low battery level.
●
Blue: An integrated wireless device, such as a WLAN
device, is on.
●
Amber: All wireless devices are off.
Turns the wireless feature on or off, but does not establish
a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.