Setup Utility; Starting Setup Utility; Changing The Language Of The Setup Utility - HP G61-306 Maintenance And Service Manual

Starting Setup Utility

The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows® operating system is not working.
✎
The fingerprint reader (select models only) cannot be used to access the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other preferences.
To start the Setup Utility:
CAUTION: Open the Setup Utility by turning on or restarting the computer. While the "Press the ESC key for Startup Menu"
Ä
message is displayed in the lower-left corner of the screen, press
– or –
1. Open the Setup Utility by turning on or restarting the computer. While the "Press the ESC key for Startup
Menu" message is displayed in the lower-left corner of the screen, press
2. When the Startup Menu is displayed, press

Changing the language of the Setup Utility

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the "Press the ESC key for Startup
Menu" message is displayed in the lower-left corner of the screen, press
– or –
Open the Setup Utility by turning on or restarting the computer. While the "Press the ESC key for Startup
Menu" message is displayed in the lower-left corner of the screen, press
displayed, press
2. Use the arrow keys to select System Configuration > Language, and then press
3. Use the arrow keys to select a language, and then press
4. When a confirmation prompt with your language selected is displayed, press
5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press
enter
Your change goes into effect immediately.
Maintenance and Service Guide
.
f10
.
.
f10
.
f10
.
enter

Setup Utility

.
esc
.
f10
. When the Startup Menu is
esc
.
enter
.
enter
5
5–1