HP G61-306 Maintenance And Service Manual page 74

3. Turn the computer right-side up, with the front facing you.
4. Remove the Phillips PM2.5×6.0 screw that secures the top cover to the computer.
5. Lift the rear edge of the top cover 1 until the top cover disengages from the base enclosure.
6. Release the LIF connector 2 for the two TouchPad cables from the system board .
7. Remove the top cover 3.
✎
The TouchPad is glued to the top cover and is included with the top cover spare part.
Reverse this procedure to install the top cover.
Maintenance and Service Guide
Removal and replacement procedures
4–31