System Compatibility - Lux Products SMART TEMP TX9100Uc Installation And Operating Instructions Manual

T X 9 10 0 U c
Fan Mode
Switch
System Mode
Switch

SYSTEM COMPATIBILITY:

The electrical rating for this thermostat is 1.5 Amps per terminal, with a
maximum total combined load of 3.0A for all terminals combined.
COMPATIBLE WITH:
• Most 24-volt heating and cooling systems
• 1 or 2 stage Heat / 1 or 2 stage Cool: Gas, Oil or Electric systems
• 1 or 2 stage Heat / 1 stage Cool: Heat Pump systems
• 3-wire hydronic (hot water) zone valves
• Gas Millivolt heaters
NOT COMPATIBLE WITH:
• 120/240 VAC line-voltage systems (without a transformer), or on heat pumps
that have two compressor stages (Y2). Ask your dealer for other LUX
thermostats to control those systems.
FAN
AUTO
ON
TEMPERATURE
HEAT
SETBACK
OFF
COOL
LCD Display Screen
RUN
DAY/TIME
TEMP PROG
SPEC PROG
FILT / ENRGY
HOLD
UP / DOWN Buttons
3
Set Slide
Switch
SET
COPY/
EMER
NEXT