Bluetooth Module Cable; System Board - HP EliteBook 8770w Maintenance And Service Manual

Bluetooth module cable

NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number 652545-001.
Before removing the Bluetooth module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the optical drive (see
bay hard drive on page
7. Remove the keyboard (see
8. Remove the top cover (see
9. Remove the bluetooth module (see
10. Remove the card reader/USB 3.0 board (see
Remove the Bluetooth module cable:
1. Position the computer right-side up with the front toward you.
2. Disconnect the Bluetooth cable (1) from the system board.
3. Remove the Bluetooth cable (2).
Reverse this procedure to install the Bluetooth module cable.

System board

NOTE: All system board spare part kits include replacement thermal material.
92 Chapter 4 Removal and replacement procedures
Battery on page 42).
Service access cover on page
Optical drive on page
57).
Keyboard on page
Top cover on page
Bluetooth module on page
Card reader/USB 3.0 board on page
54) or upgrade bay hard drive (see
62).
73).
50).
43).
Upgrade
91).