HP EliteBook 6930p Maintenance And Service Manual page 88

Notebook pc
Hide thumbs Also See for EliteBook 6930p:
Table of Contents

Advertisement

12.
If it is necessary to replace the display bezel or display hinges, remove the four rubber screw
covers (1) and the four Phillips PM2.5×7.0 screws (2) that secure the display bezel to the display
assembly. The rubber screw covers are available in the Rubber Kit, spare part number
482966-001.
NOTE:
13.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
14.
Remove the display bezel (3). The display bezel is available using spare part numbers 488189-001
(for use with computer models equipped with a webcam) and 488190-001 (for use with computer
models not equipped with a webcam).
15.
If it is necessary to replace the display hinges, remove the two Phillips PM2.5×7.0 screws (1) that
secure the display hinges to the display enclosure.
80
Chapter 4 Removal and replacement procedures
See
Display inverter on page 45
for procedures on removing the display inverter.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents