Docking In The Landscape Position - HP Compaq tc1100 Reference Manual

Docking in the Landscape Position

Before you begin, place the Docking Station and the docking
stand on a firm, flat surface.
To dock the tablet PC in the landscape position:
1. Align the docking alignment slots on the lower edge of the
tablet PC with the alignment brackets on the docking stand.
Then, while supporting the back of the docking stand with
one hand, slide the tablet PC into the docking stand until the
lower edge of the tablet PC (shown on the right-hand side of
the illustration below) is firmly seated.
Ä
Seating the lower edge of the tablet PC in the docking stand in the
landscape position
Reference Guide
To prevent misdocking:
Slide the tablet PC into the docking stand; do not push
the tablet PC against the docking stand.
Slide the 2 alignment slots on the tablet PC onto the
2 alignment brackets on the docking stand simultaneously
and with equal pressure.
The non-skid rubber pads on the bottom edge of the
docking stand should rest against a firm, flat surface, such
as a desk.
Docking and Undocking the Tablet PC
2–9