Epson EMP-X56 User Manual page 33

List of Functions
*2 When the Mail Notification function is set to "On" and a problem or warning occurs with a projector, the following mail is sent.
Subject: EPSON Projector
First line: The name of the projector where the problem has occured
Second line: The IP address set for the projector where the problem has occured
Third line and on: Details of the problem
The details of the problem are listed line by line. The following table explains the details shown in the message.
For details on dealing with problems, see "Reading the Indicators".s
Message
Internal error
Fan related error
Sensor error
Lamp cover is open.
Lamp timer failure
Lamp out
Internal temperature error
High-speed cooling in
progress
Lamp replacement
notification
No-signal
A (+) or (-) will appear at the start of the message.
(+): A projector problem has occured
(-): A projector problem has been dealt with
Cause
Internal Error
Fan Error
Sensor Error
Lamp Cover Open
Lamp Failure
Lamp Error
High Temp Error
(Overheating)
High Temp Warning
Replace Lamp
No signal
No image signal is being input to the
projector. Check the connection status
and the power supply to connected
equipment.
p.38
33