Power Cord Set Requirements
General Requirements
The following requirements are applicable to all countries:
■
The length of the power cord set must be at least 1.5 meters
(5 feet) and a maximum of 2 meters (6.50 feet).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
■
The power cord set must have a minimum current capacity of
10 amps and a nominal voltage rating of 125 or 250 volts AC,
as required by each country's power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Italy
B–2
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
FIMKO
UTE
VDE
IMQ
Applicable Note Number
1
1
1
2
1
1
1
1
1
Maintenance and Service Guide