3-2. Fastening the swivel
and tilt base
3-3. Selecting a suitable
location
Q770
Perfectly Flat Monitor
•
Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
•
Push the base towards the front of the monitor until the latch locks into
position.
•
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
•
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
•
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
•
Position the monitor so that the top of the screen is no higher than eye level.
•
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
BACK
NEXT
4/18