Removing Drivelock Protection - HP Compaq Presario,Presario R4000 Hardware And Software Manual

Removing DriveLock Protection

To access the DriveLock settings in the Setup utility:
1. If the notebook is on, shut down the notebook.
If the notebook is not on and you are not sure whether the
notebook is off or in hibernation, press the power button and
then shut down the notebook through the operating system.
2. Turn on the notebook.
3. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > DriveLock
Password, and then press
5. Type the current password in the Enter Current Password
field, and then press
the remaining password fields indicates that you are
removing, not changing, the password.)
6. When the Setup Notice is displayed, press
changes.
7. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide
while the Setup message is displayed in the
f10
enter.
3 times. (Pressing enter at each of
enter
Security
to save your
enter
f10,
12–17