Security
3. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > Power-On
password, and then press
❏
❏
❏
5. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Entering Power-On Passwords
At the power-on password prompt, type your password, and then
press
enter.
you must restart the notebook and try again.
12–12
while the Setup message is displayed in the
f10
To set a power-on password, type the password in the
Enter New Password and Confirm New Password
fields, and then press
To change a power-on password, type the current
password in the Enter Current Password field, type the
new password in the Enter New Password and Confirm
New Password fields, and then press
To delete a power-on password, type the current password
in the Enter Current Password field, press
and then press
After 3 unsuccessful attempts to enter the password,
enter.
enter.
f10.
enter.
enter
Hardware and Software Guide
3 times,
f10,