Table of Contents
Advertisement
7. Self Test
The self test let you know if your printer is operating properly. It checks the printing quality,
ROM version, DIP Switch settings, memory switch settings and statistic data.
The test is independent of any other equipment or software, so it is a good idea to run it
when you first set up the printer or if you have any trouble. If the self test works correctly, the
problem is in the other equipment or the software, not the printer.
• Running the self test
1) Make sure the printer is turned off and the printer cover is closed properly.
2) Turn on the power while pressing the Feed button and release the button, then the paper
will feed. Self diagnostics will begin and printer settings will be printed. Paper will be cut
upon completion of the test and printing will stop. (ERROR lamp will be on.)
3) Press the FEED button to continue printing the statistic data.
4) Press the FEED button to continue printing the rolling ASCII pattern.
5) The self test mode terminates after printing the rolling ASCII pattern automatically.
Rev. 1.02
- 30 -
SRP-275III
Advertisement
Table of Contents
