Specific Safety Rules - Chicago Electric DEMOLITION HAMMER 93853 Set Up And Operating Instructions Manual

1. Tool service must be performed only by qualified repair personnel.
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
1. Maintain labels and nameplates on the Demolition Hammer.
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2. Always wear ANSI-approved safety impact eye glasses and a full face
shield when using the Demolition Hammer. Also wear heavy-duty steel-toe
boots, hearing protection, dust mask or respirator, and heavy duty work gloves.
Using personal safety devices reduce the risk for injury.
Maintain a safe working environment.
3.
sure there is adequate surrounding workspace. Always keep the work area free
of obstructions, grease, oil, trash, and other debris. Do not use a power tool in
areas near flammable chemicals, dusts, and vapors. Do not use this product in a
damp or wet location.
4. Avoid unintentional starting.
turning on the Demolition Hammer.
5. Do not force the Demolition Hammer.
safer at the speed and capacity for which it was designed.
6. Keep hands, fingers, and feet safely away from the cutting area.
7. Never leave the Demolition Hammer unattended when it is plugged into an
electrical outlet. Turn off the tool, and unplug it from its electrical outlet before
leaving.
8. Before using the Demolition Hammer, check to make sure the chisel is
properly mounted in the Slider of the tool. Make sure the Chisel is sharp, and
is not cracked or bent.
9. Industrial applications must follow OSHA guidelines.
10. Always hold the Demolition Hammer
gripping surfaces; this offers protection against electrical shock, if the
tool's chisel contacts hidden wiring or its own power cord.
SKU 93853 For technical questions, please call 1-800-444-3353
SERVIcE

SpEcIFIc SAFETY RuLES

Make sure you are prepared to begin work before
Keep the work area well lit. Make
This tool will do the work better and
with both hands by its insulated
Service
These carry
PAGE 5