Customizing Power Management Features - HP Compaq Presario,Presario 80XL201 User Manual

NOTE: To know the pre-defined
settings for the above three
options, you can select the next
option to view the settings in the
submenu.
Setup Configuration Utility 5-8
When this item is selected, no submenu will display. A check mark
( ) indicates Enabled; an underline ( _ ) indicates Disabled.
The default setting is Enabled.
Max Performance / Balanced Power Saving / Max Power
Saving / Customize
These four items are mutually-exclusive options. You can select
one of them. A check mark (
indicates Disabled.
Descriptions of the four options are:
Options
Max Performance
Balanced Power Saving Select this option for the pre-defined
Max Power Saving
Customize

Customizing Power Management Features

To customize Power Management features, select "Customize" from
the Power pull-down menu. The submenu will display as shown
below.
Customize
Hard Disk Power Down After:
Standby After:
Suspend After:
Suspend Data to:
Cover Close:
Battery Low Warning Beep:
VGA Activity:
Resume On Time:
Hour
Minute
Second
Resume On Modem Ring:
The followings describe in sequence all the items of this submenu.
) indicates Enabled; an underline ( _ )
Descriptions
Select this option for the pre-defined
settings which allow maximum
performance but shortest battery life.
settings which allow moderate
performance and moderate battery life.
Select this option for the pre-defined
settings which allow longest battery life
but minimum performance.
Select this option for setting up your own
preferences. When this option is
selected, a submenu will appear. See the
following subsection for information.
20 Min
Disabled
Disabled
RAM
Suspend
Enabled
Enabled
Disabled
0
0
0
Disabled
My Presario – Getting Started