HP Compaq Presario,Presario 7585 Supplementary Manual

If your computer goes into Standby mode, the
connection to SBC DSL may be lost. You must
restart your computer to reenable the DSL
connection. To ensure the DSL connection
remains stable, we recommend that you disable
the standby mode of your computer by going into
the Power Management area of Control Panel and
disabling Standby.
1. Select Start / Settings / Control Panel.
2. Double-click on the Power Management A Icon.
3. Click on Power Schemes.
4. Select the Always On option.
5. Click OK.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDI-
TORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CON-
SEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
This card contains information protected by copyright. No part of this card may be photocopied or
reproduced in any form without prior written consent from Compaq Computer Corporation.
Product names mentioned herein are trademarks and/or registered trademarks
Printed in the U.S.A., Brazil, Canada, Japan, Korea, Singapore, Taiwan, and the U.K.
The information in this card is subject to change without notice.
USE OF THIS MATERIAL.
©2000 Compaq Computer Corporation. All rights reserved.
Compaq is registered with the U.S. Patent and Trademark Office.
of their respective companies.
Second Edition, July 2000
NOTICE
212406-002