Table of Contents
Advertisement
Troubleshooting
PROBLEM
Motor doesn't start or
blade doesn't rotate
Food is unevenly
chopped
Food is chopped too fine
or is watery
Food sticks to blade
and jug
Blender overloaded
(all lights flashing)
EASY SOLUTION
•
Check the blender jug and lid are securely in place.
•
Check the ON | OFF button and selected function button is illuminated.
•
Check that the power plug is properly inserted into the power outlet.
•
This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
•
The ingredients may be too large. Try cutting into smaller pieces. For best
results, ingredients should be in pieces no larger than 2cm.
•
Try blending for shorter period of time. Use the AUTO PULSE/ ICE CRUSH
function for better control.
•
The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending.
•
This blender has overload protection to prevent damage to the motor.
OVERLOAD PROTECTION will flash on the LCD. Unplug and allow the
blender to cool down for 30 minutes. Once cooled, you will be able to use the
blender as usual again.
•
We recommend blending in smaller batches, or cutting ingredients into
smaller batches.
13
Advertisement
Table of Contents
