Before First Use; Assembling And Attaching The Blender - Breville Fresh & Furious BBL620SIL Instruction Book

Functions

BEFORE FIRST USE

Before using your Breville Blender for the first
time, remove any packaging material and
promotional labels.
Wash the lid, inner lid, blender jug (refer to
"Care & Cleaning) in warm, soapy water
with a soft cloth. Rinse and dry thoroughly.
Do not place parts in the dishwasher (with the
exception of the blender jug).
The blender jug may be washed in the
dishwasher. Ensure the lid has been removed
from the blender jug before placing into the
dishwasher. The motor base can be wiped with
a damp cloth. Dry thoroughly.
ASSEMBLING AND ATTACHING
THE BLENDER
Step 1
Place the motor base on a flat, dry surface such
as a counter-top. Ensure that the motor base
is turned off at the ON | OFF button and the
power cord is unplugged.
Step 2
With the blender jug in the upright position
place it on the motor base. The handle of the
blender can be positioned to the left or right
hand side of the appliance.
8
Step 3
Add food or liquid into the blender jug ensuring
not to exceed the 'MAX' mark.
Place the blender lid firmly into position on
the top of the blender jug. Insert the clear inner
measuring lid into the blender lid and turn
clockwise to lock into position.
Your Breville Blender features a Breville Assist™
Lid. This allows the lid to fit tightly onto the
blender jug, avoiding displacement during
operation. The ring pull design allows the user
to easily remove the lid with a simple leverage
action.
Step 4
Plug power cord into a 240V power outlet and
turn on.
Step 5
Press the ON | OFF button on the far left of
the control panel to turn the blender on.
The ON | OFF button will illuminate and flash.
The LCD timer screen will illuminate with
'00' displayed.
• Flashing light indicates ready to operate.
Avoid any contact with moveable parts while
in operation.
• Do not fill the blender jug above the 'MAX'
line. When the blender jug is filled at or near
the 'MAX' line place one hand on the blender
lid to avoid displacement of the lid during
operation.