Enabling Wi-Fi Direct Mode (Simple Ap) - Epson C11CG92201N User Manual

Enabling Wi-Fi Direct Mode (Simple AP)

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Press the
2. Select the
You see a screen like this:
3. Select Wi-Fi Direct.
4. Select Start Setup.
5. Select Start Setup again.
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen and enter the displayed password.
Note: You can also scan the QR Code on the LCD screen to view online setup instructions.
7. When you are finished, scroll down on the product's LCD screen and select OK.
8. Press the
The Wi-Fi Direct icon displayed on the LCD screen indicates if Wi-Fi Direct is enabled on the
product. If your device is not connected, repeat step 6 and make sure you enter the password correctly.
home button, if necessary.
icon.
home button to return to the Home screen.
50