Table of Contents
Advertisement
OPERATION
3.
Squeeze throttle trigger (B)
gradually and increase engine
speed.
4.
The chain starts running when
the engine reaches clutch
engagement speed.
5.
Confirm proper acceleration and
lubrication of chain and bar.
6.
Do not run the engine at high
speed unnecessarily.
7.
Be sure that saw chain stops moving when throttle trigger is released.
Stopping
1.
Release throttle trigger (B) and
allow engine to idle.
2.
Move ignition switch (A) DOWN
to "STOP" position.
Note: If engine does not stop,
pull choke control knob out
fully to stop engine.
Note: Return the unit to your
authorized dealer to check
and repair stop switch
before starting the engine
again.
Checking Chain Tension
Chain tension should be checked
frequently during work and corrected
as necessary.
Do not operate with a loose chain.
34
CS-361P
B
A
B
X7503323307
© 03/22 ECHO Incorporated
Advertisement
Table of Contents
