6. Next assemble the casters by inserting the wheel into the caster frames and secure with the caster bold
and nut which were provided with the casters. See figure 7 / 8
7. Next assemble the casters by inserting the wheel into the caster frames and secure with the caster bold
and nut which were provided with the casters. See figure 9 / 10
Figure 9: Non-Brake caster mounted
Note: Left side of stand has locking caster in front and non-locking caster in back.
8. Once assembly is completed, insert the end caps [3331] into the cart frame.
Figure 7 / 8: Caster wheel assembled
8
Figure 10: Brake caster mounted