Machine Cleaning Points; Machine Cleaning Instructions - Xyron XRN4400 Instruction Manual

MACHINE CLEANING POINTS

CLEANING INSTRUCTIONS
1. Clean only when needed, with recommended cleaning solution. Isopropyl alcohol is recommended.
2. Be careful with knives near the rollers. Cutting a roller will cause repeating marks in the rollers, and is non
warranty damage.
3. Do not allow very thick objects to pass through the rollers. A large irregular object passing through the rollers
may cause damage. Use the minimum amount of pressure necessary to clean the rolls. You can destroy the
silicone layer on the rolls by pressing to hard or scrubbing too long in one spot.
4. Exercise care when cleaning the rolls with 80% isopropyl alcohol:
A. Use only in a well ventilated area.
B. Wear rubber gloves.
5. Harsh chemicals like toluene, acetone or MEK destroy the rollers and paint finish.
8. Do not use liquid or aerosol cleaners on the laminator. Do not spill liquid of any kind on the laminator as you can
be severely shocked, electrocuted or cause a fire. Use only a damp cloth for cleaning.
23