Selecting Easy Cd & Dvd Creator 6 Settings - HP Compaq NC6000 Software Manual

Erasing Recorded Media with Creator Classic
To erase recorded media formatted with Creator Classic:
1. Insert the CD into the optical drive.
2. Open the Creator Classic window:
❏
❏
3. In the Source window, select the optical drive containing the
disc you wish to erase.
4. On the Creator Classic menu bar, select Disc > Erase Disc.
Selecting Easy CD & DVD Creator 6 Settings
To use Drag-to-Disc, Creator Classic, or Disc Copier, the
default settings shown in the following table must be selected.
These settings are compatible; for example, the settings for
Drag-to-Disc do not conflict with the settings for Disc Copier.
Application
Drag-to-Disc
Creator Classic
Disc Copier
*Auto Insert Notification settings are selected through the operating
system.
**Disk-at-Once and Track-at-Once are recording methods that appear
in the Record Setup window after you begin burning a CD.
Software Guide
In Windows 2000, select Start > Programs > Roxio Easy
CD and DVD Creator 6 > Creator Classic.
In Windows XP, select Start > All Programs > Roxio
Easy CD and DVD Creator 6 > Creator Classic.
Required Settings
Enable Auto Insert Notification*
Disable Disc-at-Once**
and
Enable Track-at-Once**
Disable Disc-at-Once
Optical Drive Software
4–11