Setting Drivelock Passwords - HP Compaq NC6000 Software Manual

Setting DriveLock Passwords

Ä
CAUTION: If you forget the DriveLock user and the DriveLock master
passwords, the hard drive is permanently unusable.
Ä
CAUTION: To prevent loss of work and damage to the notebook and
the hard drive, shut down the notebook before inserting or removing a
primary hard drive. (The primary hard drive is any hard drive used in
the hard drive bay.)
To access the DriveLock settings in Computer Setup, you must
shut down, then turn on the notebook. If you open Computer
Setup from a Windows restart, DriveLock settings are not
accessible.
1. Verify that the notebook is off and not in Hibernation by
pressing the power button. If your work returns to the screen,
shut down the notebook.
2. Insert the hard drive into the notebook (not an optional Port
Replicator or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the
notebook. Press
message is displayed in the lower left of the screen.
❏
❏
4. Use the arrow keys to select the Security menu > DriveLock
passwords, then press
5. Select the location of the hard drive, then press
6. Toggle the Protection field to Enable.
7. Read the warning. To continue, press
8. Type your user password in the New Password and Verify
New Password fields, then press
9. Type your master password in the New Password and Verify
New Password fields, then press
Software Guide
f10
To change the language, press
For navigation instructions, press
while the F10 = ROM Based Setup
.
enter
f10.
f10.
f2.
f1.
f10.
.
f10
Security
3–11