Setting A New Default Boot Sequence; Setting A Multiboot Express Prompt - HP Compaq NC4010 Software Manual

Setting a New Default Boot Sequence

Use Computer Setup to set a startup sequence that the notebook
uses each time it is started or restarted.
1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence that you
prefer.
5. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.

Setting a MultiBoot Express Prompt

Use Computer Setup to set the notebook to display the MultiBoot
menu each time the notebook is started or restarted.
1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
Software Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
enter.
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
enter.
F2.
F1.
F2.
F1.
MultiBoot
5–5