Multiboot Preferences; Setting A New Default Boot Sequence - HP Compaq tc1100 Hardware And Software Manual

MultiBoot Preferences

There are 2 ways to set MultiBoot sequences:
■
Set a new default boot sequence that the tablet PC uses each
time it starts up.
■
Use variable boot sequences using MultiBoot Express. This
feature prompts you for a startup device each time the
tablet PC is started or restarted.

Setting a New Default Boot Sequence

Use Computer Setup to set a startup sequence that the tablet PC
uses each time it is started or restarted:
1. Open Computer Setup by turning on or restarting the
tablet PC. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot options, and
then press
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence that you
prefer.
5. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and they
take effect when the tablet PC restarts.
Hardware and Software Guide
f10
To change the language, press
For navigation instructions, press
enter.
while the F10 = ROM Based Setup
f2.
f1.
MultiBoot
B–5